Your current location: Home - Our Products - X-ray Crystal Orientation Instrument - YX-2H8 X-RAY CRYSTAL ORIENTATION INSTRUMENT SAMPLE TABLE
YX-2H8 X-RAY CRYSTAL ORIENTATION INSTRUMENT SAMPLE TABLE

YA model Sample Table 
It is mostly used for testing the big crystal pillar and slice being composed with single crystal of Silicon and sapphire, whose weight is from 1 kg to 30kgs, and diameter from 2 inches to 8 inches. At the some time, adding the air pump to test the slice whose diameter from 2 inches to 8inches.

YB model Sample Table  
It is mainly used for the cylindrical crystal of silicon and sapphire single crystal face detection, increasing the load-bearing track. The  sample stage V-groove design, and can automatically adjust the width of the V-shaped groove. To facilitate the different specifications of a large cylindrical crystal radial 360°sample stage rotation. User-friendly design, and equipment is more reasonable, measurable, weighing 1-30 kg, 2-8 inches in diameter, 350mm rods long face, adding pump can be measured 2-8 inches of sheet samples.

YD model Sample Table     
It is mainly used for the testing single chip of silicon and sapphire cylindrical reference surface, the suction plate to receive the location of the X-ray is the open design, to overcome the problem of the X-ray and positioning of the suction disk inorder to test the diffenert parameters erystal sample. The sample stage of the suction pump suck, 2-8 inch chip to make the detection more accurate.

YE model Sample Table    
It is mostly used for testing the silicon and sapphire with more testing spots, whose testing sample stand can be rotated by operation, such as 0°90°、180°or  270°,in order to meeting the clients' special requirements.