Your current location: Home - Our Products - X-ray Crystal Orientation Instrument - YXL-2MODEL X-RAY CRYSTAL STICKY MATERIAL ORIENTATION INSTRUMENT

This  instrument  adopts  two  types  of  working  table: unilateral  working  table  and  bilateral  working  table. The  unilateral working  table  is  crystal  rod  sticky  machine. The  sticky  machine  matched  with  cutting  machine  to  be  used  for  cutting  by  AT shape, crystal  rod  orientation  by  big  R plane, uses  micrometer  for  micro  adjustment, layer  number's  lifting  up  and  down  is  done  by  the  cushion  bar  corresponding  the  crystal  rod.
Crystal  rod  is  pasted  on  the  + X plane  of  material  board. One  side  of  the  bilateral  table  is  for  sticky  material, the  o ther  side  is  for  sticky  material, the  other  side  is  for 300-type  orientation  for  detecting  after  cutting.
YXL-3  crystal  sticky  material  orientation  instrument's  working  principle  is  as  same  as  that  of  YXL-2's  except  for  the crystal  rod  is  pasted  upwards  on  the -X plane  of  material  board.

Technical Parameters
  ● Input power: Single-phase AC voltage with 220V,50Hz,0.3KW
  ● X-ray tube: Cu target, air cooling.
  ● Counter: Geiger counter
  ● Time constant: 0.1s, 0.4s, 3s
  ● Testing Range of angle :θ=-10°—  50°,2θ=-10°—  100°
  ● Angel reading: the minimal read values marked on degree scale: 2θ:1°,θ:1°
  ● Optical Shuttle: manually
  ● Displaying: digital angle displaying
  ● Precision: ±10″
  ● Main frame model is :YX-300
  ● Size:1140mm(L)×650mm(W)×1100mm(H)
  ● Weight:180kg

Main Parameters
  ● Sticky board dimension:330mm(300mm)×200mm(190mm)×20mmor 250mm×250mm×20mm
  ● Crystal rod thickness:10、9、8、7
  ● Sticky layers number:5(6)
  ● Layer number adjustment:Cushion bar
  ● board fixed method:magnetic
  ● board movement method: imported Precision  rail
  ● sticky precision:±10"
  ● sticky precision display:digital / analograte Meter,  with the peak Memory
  ● minimum reading:1"and 3"
  ● Host model:YX-300